Campfire Talk

We hope that you will visit our Campfire Talk page for great conversation where we hope you will share your stories, your tips, and ideas. Strong lifelong friendships are made everyday doing what we love in the great outdoors, and we hope you will enjoy your time here.

How to Make Your

Own Ghost Shrimp

Pump

Fish On!

Contact us if you would like to have your

articles published on our website!

 How To Make Your Own Ghost Shrimp Pump Author: Ivan Forum Member Keciga Here are all the parts you'll need.  Take the PVC test plug and the 2 extra washers and assamble them together, drill an apropreate hole according to your bolt of the test plug into the 3/4in cap.Make sure you don't drill the hole too big. Now put it together with the 3/4 in cap. Take your 2in cap and drill a 1in hole in the middle. Cut the 3/4in PVC tube to 33 1/2in and insert it into the 2in cap. Attach the T to the tubing. Attach the test plug with the 3/4in cap to the tubing. Insert what you have so far into the 2in PVC tubing Cut the 2in tubing in a 45degree angle on the bottom. the shortest part of the angled cut will measure 36in Bring it all together and put the 2in cap on the 2in tubing. The 2 in cap is the only one that will not have PVC cement in case you need to adjust the plug. Take two 3/4in caps and two pieces about 2in long and put them together. Insert the two pieces into the T After you like the way everything fits together take your PVC cement and glue it to every cap and T except for the 2in cap.
© Mendenhall Family Enterprises
Lunker Hunter Image